Phone: 858-560-9161

Click on a Fiberscope model number for printable “Quick Pick” detailed product specifications.
Model	Diameter	Working Length	Articulation	Direction of View	Side View Prism Tip	Field of View
2mm
ART2-2-040	2.4mm (0.094 in)	40cm (1.3 ft)	2-way	0° Forward	No	40°
ART2-2-070	2.4mm (0.094 in)	70cm (2.3 ft)	2-way	0° Forward	No	40°
ART2-2-100	2.4mm (0.094 in)	1.0m (3.3 ft)	2-way	0° Forward	No	40°
ART2-2-130	2.4mm (0.094 in)	1.3m (4.3 ft)	2-way	0° Forward	No	40°
3mm
ART2-3-100	3.5mm (0.138 in)	1.0m (3.3 ft)	2-way	0° Forward	No	50°
ART2-3-130	3.5mm (0.138 in)	1.3m (4.3 ft)	2-way	0° Forward	No	50°
ART2-3-150	3.5mm (0.138 in)	1.5m (4.9 ft)	2-way	0° Forward	No	50°
4mm
ART2-4-100	4.0mm (0.157 in)	1.0m (3.3 ft)	2-way	0° Forward	Yes	50°
ART2-4-130	4.0mm (0.157 in)	1.3m (4.3 ft)	2-way	0° Forward	Yes	50°
ART2-4-150	4.0mm (0.157 in)	1.5m (4.9 ft)	2-way	0° Forward	Yes	50°
ART2-4-100HR	4.0mm (0.157 in)	1.0m (3.3 ft)	2-way	0° Forward	Yes	50°
ART2-4-130HR	4.0mm (0.157 in)	1.3m (4.3 ft)	2-way	0° Forward	Yes	50°
ART2-4-150HR	4.0mm (0.157 in)	1.5m (4.9 ft)	2-way	0° Forward	Yes	50°
6mm
ART2-6-100	6.0mm (0.236 in)	1.0m (3.3 ft)	2-way	0° Forward	Yes	60°
ART2-6-150	6.0mm (0.236 in)	1.5m (4.9 ft)	2-way	0° Forward	Yes	60°
ART2-6-200	6.0mm (0.236 in)	2.0m (6.6 ft)	2-way	0° Forward	Yes	60°
ART2-6-300	6.0mm (0.236 in)	2.75m (9.0 ft)	2-way	0° Forward	Yes	60°
6mm
ART4-6-100	6.0mm (0.236 in)	1.0m (3.3 ft)	4-way	0° Forward	Yes	60°
ART4-6-150	6.0mm (0.236 in)	1.5m (4.9 ft)	4-way	0° Forward	Yes	60°
ART4-6-200	6.0mm (0.236 in)	2.0m (6.6 ft)	4-way	0° Forward	Yes	60°
ART4-6-300	6.0mm (0.236 in)	2.75m (9.0 ft)	4-way	0° Forward	Yes	60°
8mm
ART4-8-100	8.0mm (0.315 in)	1.0m (3.3 ft)	4-way	0° Forward	Yes	55°
ART4-8-150	8.0mm (0.315 in)	1.5m (4.9 ft)	4-way	0° Forward	Yes	55°
ART4-8-200	8.0mm (0.315 in)	2.0m (6.6 ft)	4-way	0° Forward	Yes	55°
ART4-8-300	8.0mm (0.315 in)	2.75m (9.0 ft)	4-way	0° Forward	Yes	55°

Five different diameters and a wide selection of lengths mean that we carry an industrial Fiberscope for just about every application. Our scopes (by IT Concepts) have been honed by experience to provide instruments that are comfortable to use and capable of withstanding the rigors of the industrial working environment. The handpiece chassis is made of metal and this is complemented by insertion tubes that are sheathed with hard wearing tungsten braid.

Small Diameter Industrial Fiberscopes (2.4mm)

Fiberscopes for discerning professional users who require high quality and dependable Remote Visual Inspection equipment without overpaying for expensive brand names and unnecessary features.

Outstanding Image Clarity and Reliability
Remote Visual Inspection applications often demand scopes that can be inserted through small access points to provide high quality images of difficult to reach areas. These scopes also need to be capable of surviving the day-to-day rigors of the industrial working environment. At first view, this combination of requirements seems to like a tough order to fill, but the our available series of 2mm industrial flexible Fiberscopes (by IT Concepts) is up to the job!
 

Essential Parameters

Mechanical

Operating Temperature Working Length      -   10 deg. to 80 deg. C (14 deg. to 176 deg. F) Housing and Light   -   10 deg. to 50 deg. C (14 deg. to 122 deg. F) Guide Cable

Fluid Resistance Working length will withstand immersion in water, mineral and synthetic lubricating oils and hydraulic fluids, aviation fuel, kerosene, gasoline and diesel fuel.

Pressure Resistance Working length resistant to 1 bar (14.5 psi)

All of the backbone components in these Fiberscopes are manufactured by IT Concepts, including fiber-optic image bundles. Few other "manufacturers" of industrial Fiberscopes can state this fact. GIS reserves the right to change products and specifications without prior notice. This information does not convey any license by implication or otherwise under any patents.

Cost Effective

Why pay for unnecessary features? After all, most Fiberscopes are simply used to view inside objects and extract information to support good decision making. Consider this:

• The construction and articulation capabilities of our scopes mean that they can be inserted into as many difficult to reach areas as any other scopes.

• Our scopes have fiber-optic image bundles that provide the clarity necessary to thoroughly interpret the target inspection area.

• We build our scopes to provide users with robust and long lasting instruments.

So why pay more? We have what it takes to get the job done without over spending.



Delivery & Service
Almost every Fiberscopes from GIS is shipped from stock and our customers receive them in a matter of days. Other Fiberscope providers, including those that offer gratuitously expensive scopes make this claim, but we don’t claim to be the same, we deliver!

In addition to maintaining an extensive inventory of Fiberscopes, GIS is also there when things go wrong. From time-to-time, and even with due attentiveness Fiberscopes do get broken and require repair attention. For major and minor repairs, GIS offers a fast turn around. Customers can also take advantage of our no hassle repair exchange program that typically puts a Fiberscope back into the hands of a customer in days. Where possible, GIS will also repair scopes from other manufacturers.

Back to Top
 

Contact Us for Complete Specs

Phone: 858-560-9161